Aroma Quest AQ-L25 Manual De Instrucciones página 3

2. Chose the memory to be programmed (1 to 4) by pressing MODE. The first memory is the Default
Mode. The screen shows the starting time and when you press MODE again, it shows the ending
time of the same already-set memory.
3. In the memory to be programmed, press SET to enter. First select the starting time (hours and
minutes) using the SET, UP and DOWN buttons. Then press SET to select the days on which this
configuration is desired. Use the UP and DOWN buttons to chose among the default options for
days. Press MODE to save the changes.
4. Then choose the ending time (hours and minutes) with the use of the SET, UP and DOWN buttons.
Press MODE to save the changes
5. Set the fragrance intensity with working and pause times (using a range of 5 to 300 seconds)
a. Set the working time using the UP and DOWN buttons and press MODE to go to the next
step
b. Then set the pause time using the UP and DOWN buttons.
c. You also have the option of controlling the performance of the fragrance bottle by
programming the device according to the attached Performance Guide. Knowing how many
hours per month the diffuser will work (use the Hours per Month Calculation Worksheet from
this manual) find the closest value to that number in the left column of the Performance Guide
and decide if you want the smell to be: Soft, Intermediate or Intense. Then chose on that
same grays-range, how many days the fragrance would last and, as a result of that cell, the
top of the table will tell you how many seconds the working and pause times would last. Use
these parameters to program the equipment.
6. When you have finished programming that memory, press MODE to save all the changes. The device
will dispense to indicate that it has already been activated.
7. Repeat steps 2 to 5 to program the following memories if necessary.
8. Finally, place the bottle of fragrance and protect the equipment by closing the cover.
Quick Restart:
Press MODE for 10 seconds to delete all the programming on the device and the Default Mode
will be active again. The only settings that has to be manually changed is the local time
Pause Mode:
Occurs when the device is not actively diffusing the fragrance because it is not programmed for
the current time and the displays shows the word Pause. This pause expires when the diffuser is
activated again during preset times. Also, if you suddenly stop programming, the screen will go
back to showing the current time, saving the last settings