Troubleshooting - H.Koenig STC90 Manual De Utilización

Troubleshooting

Refer to the following table first in case of any abnormities during use.
Problem
description
The machine 1. The machine is not plugged well
does not work to the socket.
completely 2. The socket has no power.
3. The switch of the machine is not
turned on.
4. Thermal protector of motor is in
operation.
The suction 1. The main floor brush or auxiliary
power is weak nozzle is clogged.
2. The dust bag is full.
3. The filter sponge is heavily
contaminated by dust.
ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a separation of this
waste product into communities, you will need to inform your local authorities about the places where
you can return this product. In fact, electrical and electronic products contain hazardous substances
that have harmful effects on the environment or human health and should be recycled. The symbol
here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste
container is marked with a cross.
Manufactured and imported : Adeva SAS 8 rue Marc Seguin 77290 Mitry-Mory FRANCE
Possible cause
www.hkoenig.com - contact@hkoenig.com - Tel 01 64 67 00 01
Solution
1. Re-plug the plug.
2.Check the circuit breaker.
3. Press the switch button to turn
on the machine.
4. Pull the plug, and wait until
thermal protector recovers.
1. Remove the clogging.
2. Empty the dust bag timely.
3. Clean the filter sponge.