Bestway 58498 Manual De Instrucciones página 14

5. Put the Strainer back into position. Ensure
the hole in the strainer is aligned.
6. Ensure the Seal Ring is in place. Secure
the Strainer Cover back.
7. Open the connection valves.
NOTE: The Strainer must be emptied and
cleaned periodically. A dirty or blocked
strainer will reduce the performance of the
sand filter.
Lowering or Draining Pool Water
1. Switch off the sand filter and set Control Valve to the Drain
function.
2. Detach the Hose from the connection valve's Port A and
sand filter Port A and attach to Port D.
3. Switch on the sand filter to remove pool water.
WARNING: DO NOT DRY RUN THE SAND FILTER.
Winterizing
In areas that have freezing winter temperatures, pool
equipment must be winterized to protect against damage.
Allowing water to freeze will damage the sand filter and void
warranty.
1. Backwash the sand filter.
2. Drain the pool according to the pool owner's manual.
3. Unscrew the drain valve cap at the bottom of the tank and
release the remaining water.
4. Disconnect the two Hoses from the pool and the sand
filter.
5. Completely pour the sand out of the tank and dry all
components.
6. Store the sand filter in a dry location out of child's reach.
303021216267_58498_14x21cm_1500gal 美规砂滤器说明书-英
14