Instructions
IMPORTANT:
READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE.
YOUR CHILDREN'S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
This Maclaren Soft Carry Cot must only be used with
the Techno XLR.
1 ASSEMBLY INSTRUCTIONS
Detach Velcro® strips and insert side stiffeners into
the side pockets noting tapered end positions.
Zip hood and apron to Soft Carry Cot rim.
2 FITTING INSTRUCTIONS
WARNING:
CHECK THAT THE SOFT CARRY
COT ATTACHMENT DEVICES ARE
CORRECTLY ENGAGED BEFORE USE
AND THAT THE SOFT CARRY COT
IS SECURE; FAILURE TO DO SO WILL
ENDANGER YOUR CHILD'S SAFETY.
A Fully recline the seat. Remove all soft accessories
(i.e., liner, headhuggers, etc.). Release the fabric
seat and unclip wings and unclip retaining straps.
Fold fabric seat wings into seat base.
B Stow fabric seat wings under the harness.
This allows the buggy to be folded without obstructing
the mechanism.
C BEFORE PLACING BABY IN SOFT CARRY COT:
Look below Soft Carry Cot and fl ip down support legs and
remove straps from pockets.
D BEFORE PLACING BABY IN SOFT CARRY COT:
Lower Soft Carry Cot onto the seat ensuring support legs
rest on the seat pivots.
E Pull down both securing straps and locate on the
pegs each side.
F Reach below seat for under seat strap and clip
buckles together. Lift the Soft Carry Cot to check for
a secure fi tting.
IMPORTANT: This strap and slip must be used at all times
when the Soft Carry Cot is in use.
3 WASHING INSTRUCTIONS
The hood, apron and cot fabric may be machine washed
(see Washing Instructions). The cot stiff eners and baseboard
must be removed from Soft Carry Cot.
A Unzip hood and apron and remove from Soft Carry
Cot. Detach Velcro® strap and slide base board
from pocket.
B Detach Velcro® straps and remove end and side stiff eners
from their pockets. After washing, reverse
above procedure.
NOTE: The tapered end position when replacing the side
stiff eners and the size diff erence when replacing the
end stiff eners.
en
3