Introduction:
1 ) The steel surface is pickled and phosphatized, and is cured by electrostatic spraying at high temperature, suitable for
complicated working environment.
2 ) The middle tray is not designed at the center, but with unequal distance to the upper and lower trays, leaving more option
for placing the materials.
3) The arc-shaped design of the post can minimize the impact between the tool trolley and workpieces.
4) The tray has a high-bearing fixing structure and the post flange can support the tray, enhancing the bearing capacity of the
tray.
5 ) The through beam design of the bottom tray ensures higher bearing capacity of the tool trolley.
6) The static load of the whole tool trolley is 100KG.
7 ) PC gear mechanism with bearing ensures higher bearing capacity and smoother traveling.
8) Dimension of the tool trolley: 752×400×920MM (including wheels, excluding push handle) .
Schematic diagram of handle holes
Note:
The post with 4 holes at the ends is used for installing the tool trolley handle.
6
95222A
中文
EN
DE
RU
KO
PT
JA
ES