Checking The Package Contents - Pioneer PDP-S56-LR Manual De Instrucciones

Operating Instructions
Thank you for purchasing the PDP-S56-LR/PDP-S52-LR/PDP-S44-LR Speaker System.
Before using this product, please read this Operating Instructions Manual thoroughly so that you can use
this product at its full functionality.
After reading, retain this Operating Instructions in an easily accessible location so that you can refer to
this Operating Instructions whenever you have a problem or trouble during use.
This Speaker System is exclusively for use with Pioneer 42-inch plasma displays.
PDP-S56-LR is compatible with the PDP-427CMX/PDP-42MXE20, PDP-S52-LR is compatible with the PDP-
42MXE10-S/PDP-42MXE20-S, and PDP-S44-LR is compatible with the PDP-425CMX/PDP-42MXE10.
When mounting with any other models, please consult the place of purchase about installation details.
Note
This speaker is of an antimagnetic design; however, depending on its placement, for example, bringing
the speaker into the vicinity of a monitor other than a plasma display, the speaker may cause irregular
color or other effects. Should this occur, please move the speaker away from the display.
Right
Speaker units (x 2)
Left
Notes on Installation Work:
This product is marketed assuming that it is installed by
qualified personnel with enough skill and competence.
Always have an installation specialist or your dealer install
and set up the product.
PIONEER cannot assume liabilities for damage caused by
mistake in installation or mounting, misuse, modification
or a natural disaster.
Note
Depending on the manner of installation, there may be
times when colors blur or other effects appear on screen if
the speaker is placed in close proximity to any other type of
monitor. If this happens, place the speakers at a distance
from the monitor during use.

Checking the Package Contents

Check that the following items are included in the delivered package.
If any of the following items is missing or defective, immediatly contact
your dealer.
Cushions (x 2)
Cord clampers (x 2)
Screws (M8) (x 4)
Be sure to follow the instructions below to
protect your speakers from damage from
excessive input levels.
● Never play signals at a level exceeding maximum input.
● When connecting this product or any other audio or
visual equipment to an amplifier, be sure the power to the
amplifier is turned off.
Avoid raising the volume too high when using an graphic
●
equalizer to greatly amplify high-frequency sounds.
● Never raise the volume too high when using a low-output
amplifier. (Doing so would result in increased distortion
in the amplifier's high-frequency range, and thus result in
damage to the speakers.)
Connection cords (x 2)
Operating instructions
(This document)