Set Time And Date; Calibrating Sound Level Meter; Cautions - koban KS 6701 Manual De Instrucciones

please wait...". When transmission is complete, it opens a dialog box,
you need to enter a filename, then save the data in your computer.
To open a saved file in the computer, run the software of sound level
meter, click "FILE", then click "OPEN" on the menu. Select and open
corresponsive filename in the dialog box. It is all right.

Set time and date

Press "MAX" button then turn on the meter, LCD display time(hour, minute,
second), the second digitals are flashing, press "LEVEL▲" or "LEVEL▼"
to increase or decrease time; press "MAX" to set minute, hour, mouth, year.
after setting is completed, turn off the meter.

Calibrating Sound level Meter

When Sound Level Meter is used for a long time, it's accuracy may reduce,
we need to check and calibrate it, normally a time for each year. Calibration
needs a standard sound source, please contact with us about the method.
Caution
1. Do not use the meter in a high temperature or wet place.
2. When you do not use for a long time, please take out battery to avoid
damaging the meter by electrolyte.
3. Auto-range (30-130dB) is unfit for measuring a instantaneous and
impactive noises.
4. To measure sound level in a windy environment, please put windscreen
on the microphone to avoid noises from wind.
5. If mark " "is on the screen, it indicates the voltage is low, you must
replace battery, we advise you to use alkalescent battery.
www.grupotemper.com
Multifunction sound level meter
Instructions manual |
KS 6701
13