Mounting The Saw Chain And Blade; Tightening And Checking The Saw Chain; Lubricating The Chain; Sharpening The Saw Chain - Parkside PAHE 20-Li A1 Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Mounting the saw chain and blade

WARNING!
Wear protective gloves! There is a danger
of injury from the sharp cutting teeth!
The sprocket cover
tensioning ring
are not pre-assembled on the appliance at
delivery.
The turning of the blade
the manufacturer.
The chain travel direction
blade
must be adhered to every assembly.
Place the saw chain
Ensure that
the saw chain
the correct direction (see Fig. B).
Attach the blade
upwards and guide the saw chain
the chain sprocket
The guide rail
must be above the blade
guide
(see Fig. C).
Put the sprocket cover
Tighten the fixing screw
Now, tighten the saw chain

Tightening and checking the saw chain).

Tighten the fixing screw
Tightening and checking the saw
chain
WARNING!
Wear protective gloves! There is a danger of
injury from the sharp cutting teeth!
Undo the fixing screw
Turn the chain tensioning ring
direction to increase the tension.
The saw chain
must lie against the underside
of the blade.
Check whether the saw chain
over the blade by hand
Now tighten the fixing screw
PAHE 20-Li A1
together with the chain
and the fixing screw
is not intended by
on the
on the blade
.
is running in
with the labelling facing
around
.
on.
slightly.
(see section
completely.
.
in a clockwise
can be drawn
.
completely.
NOTE
A new saw chain
tightened more regularly.

Lubricating the chain

Remove the oil filler cap
Fill the oil tank with approx. 65 ml of organic
chain oil
.
WARNING!
Never work without chain lubrication!
If the saw chain
equipment may become irreparably dam-
aged within a short time. Always check chain
lubrication and oil level
starting work.
NOTE
Use only saw chain oil. Preferably biodegrad-
able. Do not use waste oil, motor oil, etc.
While working, check whether the automatic
chain lubrication is working correctly. Check
the chain lubricator before and during work.

Sharpening the saw chain

NOTE
You will find detailed information on
sharpening in the sharpening set, e.g. from
Oregon.
Alternatively, you can use an electrical saw
chain sharpening device and follow the
instructions of the manufacturer.
If you have any doubts about implementing the
work, the saw chain
stretches and must be
.
runs dry, the cutting
in the tank before
should be replaced.
GB │ MT
 51

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido