7Spk. Setting Set Up Menu - JVC CA-MXJD5 Manual De Instrucciones

7 SPK. SETTING Set up Menu
You can adjust the sound settings of the System.
SPK. SETTING
LEVEL
DISTANCE
SELECT
USE
TO EXIT, PRESS [SET UP].
ENTER
Speaker Diagram
• The selected speaker icon is highlighted blue.
LEVEL
Select this to enter the LEVEL submenu.
If the output sound of center speaker or surround speakers
from the listening position are not equal to that of the front
speakers, use test tone to adjust the output level to get the
best possible surround effect.
• When adjusting the output level by using the test tone, take
the disc out from the disc tray.
LEVEL
CENTER SPEAKER
SURROUND RIGHT SPEAKER
SURROUND LEFT SPEAKER
TEST TONE
RETURN
SELECT
USE
TO EXIT, PRESS [SET UP].
ENTER
1 Select "ON" of the item TEST TONE.
2 Select the speaker—CENTER SPEAKER,
SURROUND RIGHT SPEAKER, SURROUND
LEFT SPEAKER.
3 Adjust the speaker output level for the selected
speaker.
You can adjust the output level within the range of –6 dB
to +6 dB in 1 dB interval.
4 Repeat steps 2 and 3 to adjust the other speakers.
• To stop test tone, select "OFF" of the item TEST
TONE.
42
TO SELECT. USE ENTER TO CONFIRM
Front Speakers
Center Speaker
Surround Speakers
0dB
0dB
0dB 0dB
OFF
TO SELECT. USE ENTER TO CONFIRM
5 Select "RETURN" then press ENTER to return to the
SPK. SETTING Set up menu.
DISTANCE
Select this to enter the DISTANCE submenu.
See also "Setting the Speakers" on page 8.
DISTANCE
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
RETURN
SELECT
USE
TO EXIT, PRESS [SET UP].
ENTER
FRONT SPEAKER,
CENTER SPEAKER,
SURROUND SPEAKER:
RETURN:
3. 0m
3. 0m
3. 0m 0dB
TO SELECT. USE ENTER TO CONFIRM
For each speaker, set the
distance from the listening
point within the range of 0.3 m
to 9.0 m in 0.3 m intervals.
Select this then press ENTER
to return to the SPK. SETTING
menu.