Electrical
Safety
Power cord may include a current interrupter device. A test and reset button is
provided on the plug case. The device should be tested on a periodic basis by
first pressing the TEST button and then the RESET button. If the TEST button
does not trip or if the RESET button will not stay engaged,
discontinue
use
of the air conditioner and contact a qualified service technician.
Damaged power supply cord must be replaced with a new power supply cord
obtained from the product manufacture
and not repaired.
WARNING:
This appliance must be properly grounded.
The power cord of this appliance is equipped with a three-prong grounding plug.
To minimize the risk of electric shock, use the plug with a standard three-slot
grounding wall power outlet. If the power outlet does not include a grounding slot,
have a qualified electrician replace the outlet before you use the room air
conditioner.
&
WARNING:
Changing
the outlet without making the appropriate wiring
changes will create an unsafe condition that could result in fire or
electrical shock. Refer all such work to a licensed and qualified
electrician.
Preferred method
TEST--_
RESET--
Ensure proper ground
exists before use
WARNING:
Do not cut or remove the grounding prong from the power
plug.
&
WARNING:
Attaching the adapter ground terminal
to the wall
receptacle cover screw does not ground the appliance unless the
cover screw is metal and not insulated, and the wall receptacle is
grounded through the house wiring.
,_
WARNING:
If you have any doubt whether the air conditioner is
properly grounded, have the wall receptacle and circuit checked by a
qualified electrician.
Owner's Manual
9