Publicidad
5
Configuración
Para poner el Módulo USB en línea:
1.
Quitar la tensión de control y la alimentación principal del arrancador suave.
2.
Conectar el módulo al arrancador suave tal y como se muestra.
3.
Conectar el módulo al PC a través de un cable USB. El PC debería detectar el Módulo, abriéndose a continuación el Asistente de
Actualización de Hardware.
4.
Instalar el controlador USB para usar el módulo según se explica a continuación.
El controlador se puede descargar de la santerno.com.
Please choose your search and installation options.
Search for the best driver in these locations.
Use the check boxes below to limit or expand the default search, which includes local
paths and removable media. The best driver found will be installed.
Search removable media (floppy, CD-ROM...)
Include this location in the search
C:\Documents and Settings\user\Desktop\USB Comm
Don't search. I will choose the driver to install.
Choose this option to select the device driver from a list. Windows does not guarantee that
the driver you choose will be the best match for your hardware.
Pulsar Ok, y luego Siguiente. Se instalará el software. Si aparece una pantalla, pulsar Continuar. Una vez completada la instalación,
pulsar Terminar.
5.
El PC le solicitará la instalación de software de controlador de puerto serie. Repetir el procedimiento del Paso 4. Podría ser
necesario reiniciar el PC una vez instalado el software de controlador.
4/6
Welcome to the Found New
Hardware Wizard
Windows will search for current and updated software by
looking on your computer, on the hardware installation CD, or on
the Windows Update Web site (with your permission).
Read our privacy policy
Can Windows connect to Windows Update to search for
software?
Yes, this time only
Yes, now and every time I connect a device
No, not this time
Click Next to continue.
< Back
Next >
Select the folder that contains drivers for your hardware.
Browse
To view any subfolders, click a plus sign above.
Cancel
Módulo USB
This wizard helps you install software for:
FT232R USB UART
If your hardware came with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically (Recommended)
Install from a list or specific location (Advanced)
Click Next to continue.
My Documents
My Computer
My Network Places
USB Comms Drivers
Win98_ME
WinXP_Vista
amd64
i386
OK
Cancel
Publicidad
