Night Stick MT-210 Manual De Instrucciones

Instruction Manual
MT-210
THANK YOU FOR SELECTING THE NIGHTSTICK MT-210!
SAVE THESE INSTRUCTIONS
Please read these instructions before using this product. They include
important safety and operation information.
WARNINGS
NOT FOR USE ABOVE HAZARDOUS LOCATIONS
DO NOT use in explosive atmospheres, near fl ammable liquids, or where
explosion proof lamps are required.
DO NOT use in the proximity of vehicles or equipment when there is a risk
of fl ammable liquids coming into contact with the fl ashlight.
DO NOT expose the batteries to water or salt water, or allow the batteries
to get wet.
DO NOT store the batteries with metallic objects that may cause a short
circuit.
Immediately discontinue use of the batteries if they emit an unusual smell,
feel hot, change color, change shape or appear abnormal in any way.
Keep out of the reach of children.
OPERATION
The MT-210 has fi ve light modes: momentary fl ashlight, high-brightness
fl ashlight, medium-brightness fl ashlight, low-brightness fl ashlight and strobe.
The MT-210 has a single tail-cap switch providing access to all modes.
MOMENTARY FLASHLIGHT MODE
Lightly press the tail-cap switch for momentary operation. Release the
switch to turn the light off. Because the MT-210 is a multi-function light, if the
momentary fl ashlight mode is activated within 2 seconds of having turned off
the fl ashlight, the next mode in the fl ashlight's operation will be activated. If
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.mynightstick.com
more than 2 seconds have elapsed since turning off the fl ashlight, the high-
brightness mode will be activated the next time the tail-cap switch is pressed.
CONSTANT-ON
Press the tail-cap switch until it clicks and then release for constant-on
in high-brightness mode. Press and release the tail-cap switch again to turn
the light off. Because the MT-210 is a multi-function light, if the constant-
on fl ashlight mode is activated within 2 seconds of having turned off the
fl ashlight, the next mode in the fl ashlight's operation will be activated. If
more than 2 seconds have elapsed since turning off the fl ashlight, the high-
brightness mode will be activated the next time the tail-cap switch is pressed.
SELECT BRIGHTNESS LEVEL
Press the tail-cap switch either partially (momentary mode) or until the
tail-cap switch clicks (constant-on mode) multiple times in a row, and the
fl ashlight will cycle to the next mode in the fl ashlight's operation (high-
brightness, medium-brightness, low-brightness and strobe). At that point, the
next press of the tail-cap switch (within 2 seconds) will start the fl ashlight's
mode over again with high-brightness. When the desired brightness level (or
strobe mode) is reached, simply stop cycling through the brightness selection
process. To turn the light off from momentary mode, simply release the tail-
cap switch. To turn the light off from constant-on mode, simply press the
tail-cap switch one more time.
BAYCO PRODUCTS LIMITED LIFETIME WARRANTY
WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in
workmanship and materials for the original purchaser's lifetime. The Limited
Lifetime Warranty includes the LEDs, housing and lenses. Rechargeable
batteries, chargers, switches, electronics and included accessories are
warranted for a period of two years with proof of purchase. Disposable, non-
rechargeable batteries are excluded from this warranty. Normal wear and
failures which are caused by accidents, misuse, abuse, faulty installation and
lightning damage are also excluded.
In the event that Bayco Products, Inc. receives notice that any product
does not conform to its warranty, the original purchaser's sole and exclusive
remedy, and Bayco Products, Inc.'s sole and exclusive liability, shall be
for Bayco Products, Inc., at its sole option, to either repair or replace the
non-conforming product in accordance with this limited warranty.
original purchaser shall follow the instructions below to qualify for a repair
or replacement product. This is the only warranty, expressed or implied,
including any warranty of merchantability or fi tness for a particular purpose.
IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES
OR SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS OF
THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING
NEGLIGENCE), STRICT LIABILITY OR OTHERWISE.
CUMULATIVE LIABILITY TO CUSTOMER, FROM ALL CAUSES OF
ACTION AND ALL THEORIES OF LIABILITY, WILL BE LIMITED TO AND
WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT PAID BY
CUSTOMER.
If this product is used for rental purposes, the warranty term is reduced to
90 days from the date of purchase.
WARRANTY CLAIMS – USA
Return the product to the place of purchase for all warranty related issues.
If this is not possible, contact Bayco Customer Service at (800) 233-2155
M-F 8-5 Central Time for a Return Goods Authorization (RGA). Do not return
this product to Bayco without fi rst receiving an RGA Number from Bayco
Customer Service. When returning the product, the RGA Number must be
written on the outside of the shipping box.
WARRANTY CLAIMS – OUTSIDE OF USA
Return the product to the place where purchased for all warranty related
issues.
EXTENT OF COVERED WARRANTY WORK
Bayco will repair or replace this product at our option. If it is determined
that the warranty is no longer in effect, Bayco will contact you with a repair
estimate before beginning any work.
WARRANTY QUESTIONS
If you have any questions about this warranty or any other Bayco product
inquiries, please contact Bayco Customer Service at (800) 233-2155 M-F 8-5
Central Time.
INS-MT210-15
The
THE TOTAL