Brentwood Appliances JB-330BL Instrucciones De Operación Y Seguridad página 4

Parts:
Plastic Jar
50 oz. Capacity
Non-Skid Feet
and Cord Storage
Blender Jar assembly is as follows:
1. Turn the Blending Jar upside down and place on a flat surface. Add the Blade to the Base
Screw and top with the Rubber Gasket to make the Blade Assembly.
2. Place the Blade Assembly between the Plastic Jar. Turn the Base clockwise until it is tightly
secured.
3. Turn the assembled jar right side up. You may choose to add water to the jar over a sink to
make sure the base was positioned correctly and does not have leakage.
Using Your Blender:
WARNING: Avoid contact with moving parts.
1. Place the Motor Base on a clean, flat surface. Fill your Plastic Jar with your favorite
ingredients; do not fill past the Max line.
CAUTION: Add liquids first and do not overfill the product or operate it when empty.
2. Insert the Plastic Jar into the Motor Base. Add the lid with the Filler Cap in place.
Note: The Filler Cap allows you to add ingredients while blending.
3. Connect Plug to a 120 V AC electrical outlet. Blend until desired consistency is reached. Use
the Speed Guide from Page 3. Do not pulse for more than 1 minute.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This is
a result of the heating element chemical reaction. It quickly goes away.
Lid & Filler Cap
2 Speed Dial + Pulse
4
Blade Assembly
- Blade
- Gasket
- Base Screw