Troubleshooting & Solution - Watts BT DP-01 Guía De Usuario

7 Troubleshooting & Solution
Batteries
Problem
Problem on
sensors
Batteries level is
too less
My BT DP-01 doesn't start
- Check if the protection sticker on the
batteries is removed.
- Check the batteries orientation.
- Check the capacity of the batteries
My BT DP-01 Led, blinks in Red
The logo blinks (ambient sensor)
- Contact your installer or seller.
The logo blinks (Floor sensor)
- Check the connection of the sensor.
- Disconnect the sensor, and check it
with an ohmmeter
(the value must be around 10kohms)
The logo blinks (Batteries)
- Replace the batteries.
40