ALCIA VideoNET TRANSMITTER Manual De Instrucciones página 6

9. RECOMMENDATION: If you wish to get a top-quality
performance out of your VideoNET, programme all the available
TV channels on your video; in this way, you will be able to enjoy
your favourite video or channel anywhere in your house.
5. INSTALLING THE OPTIONAL TRANSMISSION NET CABLE
(FIG. 6)
1. If your mains supply is three-phase, or if certain electrical
appliances connected to the mains occasionally cause
interference, then install NET cable 18.
2. Connect NET cable 18 to NET connectors 9 & 16 using NET cable
connectors 19.
3. Set the NET switches 8 & 15 to the NET position.
4. Carry out adjustments as in section 4. INSTALLATION
INSTRUCTIONS.
5. You can increase the length of NET cable 18 by using a similar
cable.
6. SOLUTIONS TO POSSIBLE ANOMALIES
(A) Anomaly
(A) The picture quality is unsatisfactory, there is a lot of "snow" in the
picture.
(C) The automatic tuning on the TV has not tuned in properly.
(S) Tune the TV in again; if the picture is not right carry on tuning it
in until you find a picture with the right quality (it is possible to
find several points in which the picture is not right).
(A) You cannot get a picture on the TV.
(C) The NET switches 8 & 15 are not in the same position.
(S) Set the NET switches 8 & 15 to the NET position only if you are
using the optional NET cable 18.
(C) Cause
-6-
(S) Solution