Safety Information; Installation Instructions - Allen + Roth GF-12S004B Instrucciones De Instalación

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or install the product.
• Two to four people are needed for assembly.
• Maximum load for the roof hook: 50 lbs.
WARNING:
• KEEP ALL FLAME AND HEAT AWAY FROM THIS TENT FABRIC.
•
CAUTION
• Do not leave outside during high winds, heavy rains or snow. Remove the canopy.
• Fasten the base to the deck (wood or concrete) for item stability.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 2 - 3 hours
Tools Required for Assembly (not included): Ladder
Tools Required for Assembly (included): Hex Wrench and Wrench

INSTALLATION INSTRUCTIONS

1. Insert the post plate cover (C) into the supporting
post (A). Fit the post bottom plate (B) underneath
the supporting post (A). Insert two short bolts (AA)
into the supporting post (A) and secure to the post
bottom plate (B) using the hex wrench (EE), but do
not overtighten. Slide the post plate cover (C) down
into place.
Repeat this step for the remaining supporting posts
(A), post bottom plates (B) and post plate covers (C).
Hardware Used
AA Short Bolt
EE Hex Wrench
1
A
x 8
x 1
4
C
AA
B
Lowes.com/allenandroth
AA