Publicidad
Idiomas disponibles
Idiomas disponibles
Parts:
Water Level Indicator
*Some kettles have graduated markings inside Body.
Using Your Kettle:
1. Pull out the power cord from the base unit and connect it to a power outlet.
2. Open the lid then fill the water into the Kettle.
CAUTION: Do not overfill the product or operate it when empty.
3. Close the lid. Place the Kettle back onto the base unit. Making sure there is no water
on the bottom of the Kettle.
4. Turn the Kettle on by pushing the switch from "O" (off) to "I" (on). The light on the
Power Base should illuminate to indicate the Kettle is heating.
5. The Kettle will automatically switch off to the "O" position once the water has boiled.
The indicator light will turn off.
Note: The switch only works when the Kettle body is correctly placed on base unit.
6. Lift the Kettle from the base using its handle and pour out your hot water into your
mug or container.
Note: If you need to heat water again, let the appliance rest for 60 seconds before
starting again.
Lid
4
Power Switch
Handle
Power Base
Publicidad
