Operation; Care And Cleaning - Husky HOLT46XDB12 Guía De Uso Y Mantenimiento

Operation

1
Leveling Foot Adjustment
IMPORTANT : Ensure there is no weight on top of the
workbench when leveling.
□ Adjust each leveling foot (D) to the desired elevation with
a 5/8 in. wrench as shown.
□ Turn the lock nut counterclockwise to elevate and clockwise
to lower the leveling foot.
Maintenance
1
Maintaining the casters
□ Grease the casters annually using high quality
bearing grease .
2
Height Adjustment
□
Insert the crank handle (C) into the shaft and align it in the hole
until it is engaged.
□
To raise the table, turn the crank handle counterclockwise to
the desired height.
□
To lower the table, turn the crank handle clockwise until it
reaches the desired height.
□
To avoid damage, do not keep turning the crank handle once
it has rested at its highest or lowest position.
Note: Some minor squeaking is normal when operating the
crank. Lubrication is not needed.

Care and Cleaning

□ The steel in this product has been coated with industrial powder
coating for a durable finish. To help protect this finish, do not allow
harsh chemicals such as oil or grease to remain on the powder
coating surface. Use a glass cleaner ( Windex or equivalent product)
to clean and maintain all powder coated surfaces.
□ The wood top is made of Parawood (also called Rubberwood), which
has a polyurethane coating to help protect it from moisture. It can be
cleaned with most gentle household cleaners, such as Windex .
□ Do not allow chemicals, water, or other substances to remain on the
wood top for extended periods of time to reduce the risk of damage
to the wood.
8
Please contact 1-888-HD-HUSKY for further assistance.
®
®
HUSKYTOOLS.COM