Operation; Removing The Drawers - Husky VRC-4116BK Guía De Uso Y Mantenimiento

Operation

1

Removing the drawers

□
Fully extend the empty drawer.
□
u P h s u p t e h o e n
down on the other release lever.
□
Pull the drawer outward until it is released from the
drawer slide.
3
Usage of top till rubber grommet
□
When passing cords into the box, be sure to always
enter box from the rear. After head of cord is in place,
slightly pull back 2-3"to ensure weather resistant "star
bursts"are facing toward the outside of box. Never
push the cord from inside box so that mating plug
points are exposed to the environment.
□
BE SURE TO FOLLOW ALL ELECTRICAL SAFETY PRECAUTIONS.
e r e l s a l e v e r e w h e l i pulling
2
Re-inserting the drawers
□
Extend the drawer slides.
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□
Once properly inserted, completely close the drawer
to set the slides in their proper positions.
Please contact 1-888-434-8759 for further assistance.
7
HUSKYTOOLS.COM