D-Link DSL-2640T Guía Rápida De Instalación página 2

Connecting the Router to Your Computer
A. First, connect the power adapter to the receptor at the back panel of the
DSL-2640T and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn on to indicate proper operation.
B. Insert one end of the cable into any Ethernet port on the back panel of the
DSL-2640T and the other end of the cable to an Ethernet Adapter or available Ethernet
port on your computer.
C. Insert one end of the telephone cable into the ADSL port on the back panel. Connect
the other end of the cable to the telephone wall outlet or low pass filter device that is
connected to the telephone wall outlet.
ADSL Port
Connect to
ADSL line
Antenna post
Attach antenna here
Ethernet Ports
Connect to Ethernet cable
2
Power Input
Connect to
power adapter