LORCH MicorStick 160 BasicPlus Manual De Instrucciones página 29

Commissioning
14.4 Call secondary parameters
(ControlPro)
 Select the desired operating mode with button 16.
9 LED 13, 14 or 15 is lit.
 Press button 16 for 2 sec.
9 The parameter code and the associated setting value
are shown in turn in the 7-segment display 19.
 Select the desired secondary parameter by turning the
rotary knob 12.
 Confirm the secondary parameter by pressing the
control knob 12.
9 The setting value flashes in the 7-segment display 19.
 Set the desired value by rotating the control knob 12.
 Confirm the setting by pressing the control knob 12.
 Select the next secondary parameter by turning rotary
knob 12 or exit the secondary parameters by pressing
button 16.
‰ Different secondary parameters are available depend-
ing on the selected operating mode.
Code Parameter
Arc end detection
AEd
(%)
dAF Arc Force (%)
Auto-Standby
Sbt
time (min)
Hotstart (%)
StE
Start current (%)
Hotstart time (s)
Stt
Start current
time (s)
Display version
rEd
number
Master version
rEL
number
02.16
Mode
100 0...200
x x
100 0...200
x x
Off,
30
x x x
5...30
125 5...200
x x
50 5...200
1 0...20
x x
0.1 0...20
- -
x x x
- -
x x x
909.2759.9-00
x
x
- 27 -