D-Link DVG-5121SP Guía De Instalación Rápida página 8

PPPoE Configuration (continued)
Once the unit reboots, your operating system (e.g., Windows XP) will display a status
change – first disconnect then successful reconnect – in the local network connection.
Check to see if the status LED on the front panel of the DVG-5121SP changes from
blinking green to steady green.
NOTE: The information displayed under Device Info in the Web GUI is necessary for
VoIP service registration. At minimum, you will need to know your: IP address, MAC
address, Subnet address, Gateway default address, and DNS settings.
VoIP Configuration
Click SIP Setting
and then Account
Setting you login.
To enable, chose a phone,
then enter the Phone
Number, Display Name,
Username, Password and
Confirmed Password.
8