Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Model #
276W
Tuscan Pantry
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
Natural
characteristics
such as knots
provide a
natural feel.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
Rev. 3/06

Publicidad

loading

Resumen de contenidos para Whittier Wood Products 276W

  • Página 1 Model # 276W Tuscan Pantry Assembly Instructions Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Página 2 276W Tuscan Pantry – Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on parts list below. F — Door — Qty. 2 A — Top — Qty. 1 G — Front Leg — Qty. 2 H —...
  • Página 3 276W Tuscan Pantry – Parts List (cont.) O — Front Crown Moulding — Qty. 2 ZD — 3/8" x 2½" Hex Bolt — Qty. 4 O – End view; Vue de l’extrémité; Vista lateral P — Right Crown Moulding — Qty. 2 ZE —...
  • Página 4 3) The Facings are stamped “Left” and “Right” on the bottom edge. Glue the Sleepers (I) with the notch to the outside to the dowels in the Left and Right Facings (J & K). Secure in place with a #8 x 1¾" Pan Head Screw (ZA) into the predrilled holes in each notch. PAGE 4 — 276W...
  • Página 5 #6x5/8" Philtruss Screws (X). FIG. 6 6) Insert two 5mm Dowels (ZL) into appropriate holes in each Apron (L, M, & NN). Be careful not to glue dowels into the screw holes. 276W — PAGE 5...
  • Página 6 Front Legs (G). Do not try to pull the glides out after you have them in place. Hammer the Tack Glides (V) in the bottom of the Back Legs (H). Attach the legs to the apron assembly with Flat Washers (ZC) and 3/8"x2½" Hex Bolts (ZD). PAGE 6 — 276W...
  • Página 7 When door is aligned properly using the elongated holes, retighten screws. A third screw may be inserted through the round hole in the hinge into the door. 276W — PAGE 7...
  • Página 8 Tap Brad (ZP) into the hole in each Backing Plate (ZF). See FIGURE 13C. 14) When you have determined the location for your unit, install the Furniture Tipping Restraint (ZO). Carefully follow the instructions on the package. PAGE 8 — 276W...
  • Página 9 Modelo # 276W Despensa Tuscan Instrucciones para Armar Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 10: Lista De Piezas

    4. Fije el ensamble de molduras a los Paneles Laterales Sujeción para Leva de ¾" (S). Los orifi cios que se (C) con Tuercas de Sujeción para Leva de ¾" (S). Ase- gúrese de que los bordes inferiores con las palabras de PG 2 – 276W SP...
  • Página 11 Izquierda (Q), con la superfi cie más ancha hacia Evita que el Mueble se Volquee (ZO). Con cuidado arriba, al Panel Superior (A), siguiendo el mismo siga las instrucciones que vienen en el paquete. procedimiento que se indica en el Paso 9. PG 3 – 276W SP...
  • Página 12 No. de modèle 276W Placard à Provisions Politique de service : Nous remplacerons toutes Tuscan les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter Instructions de Montage directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 13: Liste Des Pièces

    276W Placard à Provisions Tuscan Liste des pièces AVANT DE COMMENCER LE MONTAGE : Assurez-vous que les quantités des pièces reçues correspondent à la nomenclature des pièces fi gurant ci-dessous. Quantité Quantité Quantité Dessus ....1 Moulage de couronne ZE Bouton.
  • Página 14 (P) et le moulage de couronne gauche (Q), avec la les instructions contenues dans le carton. surface la plus large face vers le haut, et montez-les sur le dessus (A) en procédant de la même manière qu’à l’étape 9. PG 3 – 276W FR...