AEC-PANEL19 - Installation manual
Cable kit for mounting plate AEC-PANEL19-UPS
The cable kit contains the following cable sets, which should be
connected as described in Section Wiring the devices, Page 8 to
their respective sockets.
Figure 2 Contents of the cable kit
A =
B =
C =
D =
E =
F =
G =
Bosch Sicherheitssysteme GmbH
pre mounted cable set for connecting the AMC to the
PBC-60 power supply
pre mounted cable set for connecting the rechargeable
Battery(-ies) to the UPS (uninterruptable power supply)
Connection cable for 24V-mode
Cable ties
Fastener for temperature gauge
Clip for holding loose cable ends of B in 24V-mode
Fixings
en
F.01U.097.256 | V 1.1 | 2008.12
7