Velleman KNS1 TYRANNOMECH Manual De Instrucciones página 3

Slide board S onto board X and screw
switch P17 onto board S. Use 1 fixing plate
P27 to fix boards S and X.
Fig.8
Screw a fixing plate P27 to boards
Y and Z first and then attach them
to boards B and C.
KNS1
Fig.6
Use an "L"-fixing plate (P27) to connect boards R and X.
Fig.7
Fig.9
- 3 -
Insert one wire in the PVC tube
(P25), twist the two wires and cover
the joint with the PVC tube.
Make sure the wiring is correct !!!
1. green
2. red
3. yellow
4. red
5. black
VELLEMAN