Important Safeguards
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all instructions before operating.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord, plug or appliance itself in water or other liquids.
4 . This appliance is not intended for use by persons (including children) with reduced physical sensory or
mental capabilities , or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been
damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair
or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn any control to OFF
position, then remove plug from wall outlet.
12. Oversized foods or metal utensils must not be inserted in the appliance as they may cause a fire or risk of
electrical shock.
13. A fire may occur if the appliance is covered or touching flammable material including curtains, draperies,
walls and the like when in operation.
14. Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, involving a
risk of electrical shock.
15. Extreme caution should be exercised when using containers constructed of other material other than metal
or glass.
16. Do not store any materials other than manufacturers recommended accessories in this unit when not in use.
17. Do not place any of the following materials inside the unit: Paper, cardboard, plastic and the like.
SAVE THESE INTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!
Before first use
•
All parts of the blender are to be thoroughly cleaned before being used for the first time. (see Section:
Cleaning).
•
Take out the required length of cable from the cable tidy on the base of the blender and connect the device to
the mains supply.
Assembling the Glass Jar
1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
2. Put the blade unit with sealing ring into the cup base (6).
3. Insert the assembled Cup Base onto the bottom of the glass jar and secure tightly.
4. Mount the glass cup (3) onto the cup base unit and tune the cup base unit, and turn clockwise until glass jar
locks into place.
5. Mount the Measure Cup (1) onto the Lid (2).
6. Secure the Lid onto Glass Jar and press down.