Kenmore SENS-A-CLEAN 665.75842 Guía Para El Usuario página 37

SETTING THE CONTROLS (contd.)
5, Press any pad or open the door to remove "End"
and bring back time of day.
YOU SEE
6, After the oven is cool, wipe off any residue or ash
with a damp cloth or sponge. If needed, touch up
spots with a mild abrasive cleanser or cleaning
sponge.
(when pressing any pad)
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section, p. 13.)
1, Press SENS-A-CLEAN. PRESS
SEnS setting will automatically determine the
length of cleaning time. Maximum clean time is
4'/_ hours and minimum is 2 hours.
YOU SEE
2, If you would prefer to manually set the soil level PRESS
yourself, you can choose, Light, Average, or
Heavy.
For light soils, press SENS-A-CLEAN twice, SoilL
will appear in the display. Cycle duration is
2-2_ hours.
For average soils, press SENS-A-CLEAN three
times, SoilA will appear in the display. Cycle
duration is 3-3½ hours.
For heavy soils, press SENS-A-CLEAN four
times, SoilH will appear on the display. Cycle
duration is 4-4½ hours.
YOU SEE
3, Press DELAY START.
(example shows light soil
setting)
PRESS YOU SEE
4,
Set the start time.
Press the HOUR/MIN (A) or (V) pad(s) until the
desired time of day to start the SENS-A-CLEAN
Self-Cleaning cycle shows on the display.
PRESS YOU SEE
HOUR MIN
(example for 12:30 start time)
continued on next page
37