Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE INSTRUCTION:
1.) Lubrication:
Before connection of the hose, apply 4 to 5 drops of a
good quality air oil at the air inlet. After 3 to 4 hours of
operation, oiling may be necessary again.
2.) Tightness of Parts:
Regularly check whether all connection parts are fastened
securely. Follow this procedure daily before beginning
work.
3.) Storage:
Avoid storing the tool in a location subject to high humidity.
If the tool is left unused, the residual moisture inside the
tool can cause rust. Before storing and after operation, oil
the tool at the air inlet with a good quality air tool and run it
for a short period.
4.) Disposal:
Follow national legislation of waste disposal.
5.) Ordering Service Parts:
For further operational and handling information or for
replacement of parts and components, contact the sales
agent from where you purchased the tool, or the service
division of our company.
**When ordering parts and components, give each part
number, name, and quantities**
CAUTIONS FOR USE:
1. This tool is intended for polishing and sanding with all types
of movement (e.g. rotary, orbital and reciprocating) using
abrasive products of appropriate material compositions and
grits. Any other use is forbidden.
2. Only use the polishing and sanding pads as recommended
by the pad manufacturer.
3. Not to be used with grinding or cut-off wheels.
4. Ensure the maximum operating speed of the pad is higher
than the rated speed of the power tool.
5. Centrally adhere sanding disc to support pad.
6. Always wear ANSI approved ear protection and safety
glasses when using this tool. Gloves and protective clothing
are recommended.
7. Personal protection and dust collection devices shall be
chosen according to the material being worked upon.
Please consult provider of such devices.
8. Release the the start/stop lever in the case of air supply loss.
9. Only use the lubricant recommended by the manufacturer.
MODEL:
MT2316
Page 2
Product Type:
6" PALM SANDER - 3/16" STROKE
WARNING
1. The tool shall not be used in potentially explosive atmospheres.
2. Disconnect the air hose before changing or adjusting any
inserted tools.
3. Before using tool, please confirm all couplings and plugs are
fixed securely. An air hose that is under pressure may lash
out when disconnected and could lead to serious injuries.
4. Prevent loose clothes, long hair or any other personal
accessories from coming close to moving parts to reduce the
risk of being caught, trapped or drawn into the rotating spindle.
5. Excessive high air pressure that exceeds the maximum
pressure may cause injuries to user.
6. Exposure to strong vibration for extended time may cause
harm to operator.
7. Be aware of the rotation direction before starting the tool to
reduce hazardous situations due to unexpected rotation direction.
8. WATCH YOUR STEP! Leaving excess hose unattended near
working area or walk path could result in injury or death.
9. Wearing eye/face protection could reduce the danger to
person from high speed splinters being emitted from the tool
or work surface.
10. Wearing correct breathing protection will help avoid inhaliing
dust or debries from work process that can be harmful to
your health.
11. High sound levels can cause permanent hearing loss. Use
hearing protection while operating tool.
12. Due to the material being processed, there may be a risk of
explosion or fire. Be aware of work surface dangers prior to
beginning work.
13. There is a risk of being cut due to high speed rotation. Do
not touch high speed rotating disc.
14. This power tool is not insulated. If contact is made with an
electric current, injury may occur.
15. Dust created by sanding, sawing, grinding, drilling and other
related activities may expose the user to dust and/or
microscopic particles that may contain chemicals known to
the State of California to cause cancer, birth defects or other
reproductive harm.
Publicidad
