Care And Maintenance - Levenhuk MED 1000 Serie Guia Del Usuario

Care and maintenance

Never, under any circumstances, look directly at the Sun, another bright source of light or at a laser
џ
through this device, as this may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
Take necessary precautions when using the device with children or others who have not read or who do not
џ
fully understand these instructions.
After unpacking your microscope and before using it for the first time check for integrity and durability of
џ
every component and connection.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please
џ
contact your local specialized service center.
Protect the device from sudden impact and excessive mechanical force. Do not apply excessive pressure
џ
when adjusting focus. Do not overtighten the locking screws.
Do not touch the optical surfaces with your fingers. To clean the device exterior, use only special cleaning
џ
wipes and special optics cleaning tools from Levenhuk. Do not use any corrosive or acetone-based fluids to
clean the optics.
Abrasive particles, such as sand, should not be wiped off lenses, but instead blown off or brushed away with
џ
a soft brush.
Do not use the device for lengthy periods of time, or leave it unattended in direct sunlight. Keep the device
џ
away from water and high humidity.
Be careful during your observations, always replace the dust cover after you are finished with observations
џ
to protect the device from dust and stains.
If you are not using your microscope for extended periods of time, store the objective lenses and eyepieces
џ
separately from the microscope.
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters,
џ
open fire and other sources of high temperatures.
When using the microscope, try not to use it near flammable materials or substances (benzene, paper,
џ
cardboard, plastic, etc.), as the base may heat up during use, and might become a fire hazard.
Always unplug the microscope from a power source before opening the base or changing the illumination
џ
lamp. Regardless of the lamp type (halogen or incandescent), give it some time to cool down before trying
to change it, and always change it to a lamp of the same type.
Always use the power supply with the proper voltage, i.e. indicated in the specifications of your new
џ
microscope. Plugging the instrument into a different power outlet may damage the electric circuitry of the
microscope, burn out the lamp, or even cause a short circuit.
Seek medical advice immediately if a small part or a battery is swallowed.
џ
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars and other optical products, except for accessories,
carry a lifetime warranty against defects in materials and workmanship. Lifetime warranty is a
guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be
free of defects in materials and workmanship for
Levenhuk will repair or replace such product or part thereof which, upon inspection by Levenhuk, is
found to be defective in materials or workmanship. As a condition to the obligation of Levenhuk to
repair or replace such product, the product must be returned to Levenhuk together with proof of
purchase satisfactory to Levenhuk.
This warranty does not cover consumable parts, such as bulbs (electrical, LED, halogen, energy-saving
and other types of lamps), batteries (rechargeable and non-rechargeable), electrical consumables etc.
For further details, please visit our web site: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local
Levenhuk branch.
six months from date of retail purchase.
7