Rimage Professional 5100N Guia Del Usuario página 25

Output Bin Sensor (5300N Only)
This test checks the output bin sensor located at the top of the output bin.
1. Place a disc in the output bin. The sensor beeps and the operator panel
displays [0] to show the change in status.
2. Remove the disc from the output bin. The sensor beeps and the operator
panel displays [1] to show the change in status.
3. To exit the test now, press and hold the operator button.
To continue with the next sensor test, follow the Media Sensor instructions.
Media Sensor
This test checks the media sensor located inside of the lift arm.
1. Press a disc onto the lift arm. The sensor beeps and operator panel displays
[1] to show the change in status.
2. Remove the disc from the lift arm. The sensor beeps and operator panel
displays [0] to show the change in status.
3. To exit the test now, press and hold the operator button.
To continue with the next sensor test, follow the Lift Home Sensor
instructions.
Lift Home Sensor
This test checks the lift home sensor located at the top of the lift column.
1. Rotate the lead screw clockwise to move the lift arm up. When the lift arm
is at the top of the lift column, the sensor beeps and the operator panel
displays [1] to show the change in status.
2. Turn the lead screw counter-clockwise to move the lift arm down. The
sensor beeps and the operator panel displays [0] to show the change in
status.
3. To exit the test now, press and hold the operator button.
To continue with the next sensor test, follow the Door Open Sensor
instructions.
2000447_E
Maintain the Professional
22