Commissioning (Incl. Pairing); Comfort Programs - Smart Start/Stop Mode - Würth IVT PRINETO Manual Del Usuario

Commissioning (incl. pairing)

9 Ensure that no other base stations are in pairing mode.
¾ Activate the pairing function at the base station for the desired heating zone
(see base station manual).
¾ Press the rotary control >1 s. in order to activate pairing function.
9 The base station and the room control unit are connected to each other.
Note: If the base station has been programmed before, the date and time of the
room control unit are set automatically.
For first commissioning of the base station:
¾ Set year, date and time by rotating, confirm entries by pressing.

Comfort programs - Smart Start/Stop mode

Comfort programs include pre-defined heating times to be used for working days
(1-5) or for the weekend (6-7). Outside the heating times the installation switches
to night mode. You can select the comfort programs in the Parameter menu. The
Smart Start/Stop Mode of the system calculates the required line-up times in
order to provide the desired temperature at the starting and finishing time of the
heating program.
Programm
P0
P1
P2
P3
You can create individual comfort programs with the on-line software available
under www.ezr-home.de and transfer these to the basis station with a MicroSD
card.
Comfort time 1
05:30 – 21:00
04:30 – 08:30
06:30 – 10:00
07:30 – 17:30
Comfort time 2
–
17:30 – 21:30
18:00 – 22:00
–
DEU
ENG
FRA
NDL
ITA
ESP
27