Signature SKSCF1801P El Manual Del Propietario página 16

16 OPERATION
Removing the Drawer Support
1
Press the levers on either side of the drawer
support.
2
Keeping both levers pressed, lift the drawer
support slightly and remove it from the rail system.
Assembling the Drawer Support
1
Pull both drawer rails out until they stop.
2
Line up the bottom edges on the sides of the
drawer support with the groove in each rail and
then lower the support until it clicks into place.
Adjusting the Door Bins
To adjust the location of the bin, tilt the front of the
bin up and slide the bin up or down to the desired
location.