Installation & Use; Grounding Instructions - Forno FRHWM5029-30HB Manual De Instrucciones

FEATURES
The range hood is designed for a designer's kitchen with the range hood installed directly above
cooking appliances against a wall. This hood is a focal point and show piece in your kitchen, while
providing you with the benefit of extracting the grease and smoke from your cooking.
Please refer to the instructions below
INSTALLATION & USE
WARNING
1. TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

2. GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current. This
appliance is equipped with a cord with grounding wire and grounding plug. The plug
must be plugged into an outlet that is properly installed and grounded.
WARNING – Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely understood,
or if there is doubt as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an outlet near the appliance.
CAUTION：
- To reduce risk of fire and to properly exhaust air, be sure to duct air outside
- Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces,
or garages.
NOTE: Carefully remove protective film (if any) from the exterior surfaces of the hood prior to final
installation.
DESCRIPTION / CONNECTION