Important Safety Instructions - HAMPTON BAY Home Depot 521-303 Manual De Instrucciones

Thank you for purchasing this Hampton Bay interior pendant fixture. This product has been manufactured
with the highest standards of safety and quality.
FEATURES:
1. 120 volt, 44 in. pendant with brushed nickel finish and glass shade.
2. Uses 1, 120 volt, 60 Watt MAX, standard (A19), incandescent light bulb (not included).
3. Can be used with any standard, 120 volt, incandescent style dimmer switch (not included).
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or
visit www.homedepot.com. Please reference SKU
008938602020.

IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
1. Read all instructions.
2. Do not install this lighting system in wet locations.
3. CAUTION - When the light is on, the lamp is HOT!
4. CAUTION - Hot surface. Keep away from curtains and other combustible materials.
5. Turn off/unplug and allow to cool before replacing bulb (lamp).
6. All electrical connections must be in accordance with local codes and the National Electrical Code. If
you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified
licensed electrician.
7. This fixture is intended to be mounted to a 4in. square x 2-1/8in. deep metal octagon outlet box. The
box must be directly supported by the building structure.
8. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing
the appropriate fuse at the fuse box. Turning the power off using the light switch is not sufficient to
prevent electrical shock.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included):
Bulb Safety Goggles
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
(2)Outlet Box (3)Wire
Screws Connectors
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture and lay out all of the parts.
2. Make sure main power is OFF before installation.
3. Install the thread tube each other and then secure into the bottom of the canopy and the coupler. The
fixture height can be adjusted by adding or deleting the thread tubes.
4. Unscrew the Socket Ring and retaining ring (not provided for all model) from the bulb socket assembly.
5. Place the glass shade over the bulb socket assembly.
6. Screw the socket ring and retaining ring back onto the bulb socket assembly to secure the shade in
place.
7. Loosen the canopy screw separately the mounting strap from the canopy assembly.
8. Attach the mounting strap to the outlet box using the two outlet box screws provided.
9. Wrap the ground wire under and around the ground screw which is marked " GND＂ , and fasten the
ground screw to make sure the ground wire is securely connected.
10. Make the ELECTRICAL CONNECTIONS (Required Supply Circuit: 120V, 60Hz):
a. Connect the white wire from the fixture to the white wire (neutral wire) from the outlet box.
b. Connect the black wire from the fixture to the black wire (live wire) from the outlet box.
c. Connect the ground wire from the fixture to the ground wire from the outlet box.
d. Secure the connections using the wire connectors. Wrap the wire connections with electrical
SAVE THESE INSTRUCTIONS
Ladder Gloves Wire Strippers
Mounting bracket
assembly
521-303 , UPC 008938602068 or SKU
Flathead
Screwdriver
Glass Shade socket ring
2
517-075 , UPC
Phillips Electrical tape
Screwdriver
retaining ring