Publicidad
Idiomas disponibles
Idiomas disponibles
SINGLE-PHASE STATIC METER
DOMOTAX TeLeGeST PRIME
INSTRUCTIONS ON USE
COVER
ACTIVE AND REACTIVE
PULSE LED
OPTICAL
INTERFACE
SEALABLE
SCREWS
PLC CONNECTION
STATUS INDICATOR
DESCRIPTION:
The DOMOTAX TeLeGeST PRIME is a single-phase static meter for
measuring both active and reactive energy. It is directly connected to the
interior installation, with communications capabilities and functions that
allow telemanagement.
It complies with the requirements of Directive 2014/32/UE, RD 244/2016
and ORDEN ITC/3022/2007.
"OBIS" CODE
ENERGY SENSE
PHASE PRESENCE AND
ACTIVE
CURRENT SENSE
PERIOD
Main characteristics:
1. Register
for
measuring
consumption, in import and export.
2. Register for measuring both inductive and capacitive reactive
energy consumption.
3. Six tariff periods, each with its maximum power register.
4. A single pulsed LED configured for active or reactive energy.
5. The equipment measures the following electrical magnitudes in any
quadrant:
- Active power
- Reactive power
- rms voltage
- rms current
- Phi, cos phi
6. It is fitted with an omnipolar circuit breaker.
7. Communications may be remote (via a PLC) or local (via an optical
interface).
8. Detects and registers the opening of terminal covers.
9. Detects and registers power supply circuit breaker operations and
resets.
INSTALLATION
The seals may only be removed by authorised personnel.
MOUNTING: The equipment is secured by means of the three holes that
form the securing triangle according to DIN 43 857, using the following
mounting dimensions:
DISPLAY SCREEN
ACCESSIBLE BUTTON
FOR OBTAINING ON-SCREEN
INFORMATION
SEALABLE BUTTON
FOR MANUALLY RESETTING
THE MAXIMETER
SEALABLE
SCREWS
TERMINAL COVER
SEALABLE SCREWS
DATA DIGITS
ACTIVE
REACTIVE
OPEN STATUS OF
BREAKER ELEMENTS
REACTIVE VERIFICATION
COMMUNICATIONS STATUS
ALARM
both
active
and
reactive
108
CONNECTION
Connect according to the wiring diagram, depending on model
During wiring, it is essential to secure the wire in place using both
screws.
The power terminals accept wires up to 7.5 mm in diameter (from 6 to 25
2
mm
wire section) using two M6 screws.
Auxiliary terminal block accepts wires up to 2.5 mm diameter.
DATA DISPLAY
Data is automatically shown on the screen. Another way to display data
is to repeatedly press the Info button.
CHANGING SUMMER-WINTER TIME
Summer-winter time changeover is automatically performed on the
official dates.
CLOSING
A time period can be closed in three different ways:
- Manually, by pressing the Close key
- By means of remote optical communications
- Automatically at the programmed time, on the programmed date of
energy
each month.
TECHNICAL SPECIFICATIONS
Reference voltage and frequency:
Protection class:
Own consumption in voltage circuit:
Active precision class:
Reactive precision class:
Active current values
- Start-up current:
- Minimum current:
- Transition current:
- Reference current:
- Maximum current:
Reactive start-up current:
LED constant:
Operating precision
Operating backup
Operating temperature:
OTHER TECHNICAL SPECIFICATIONS
Protection type
Optical communications
PLC communications:
CENELEC band:
Modulation type
Application level
Auxiliary contact breaking power
According to model
1
3
4
6
L
N
3
6
1
4
L
N
230 Vac
Class II
10 VA;
operating regime, without PLC
transmission or special function
operations
Class B according to EN 50470-3
Class 2 according to EN 62053-23
20 mA for cos φ =1
0.1 A
1 A
10 A
60 A
50 mA for sin φ =1
4,000 imp / kWh / kVArh
± 0.5 s/24h at 23 ºC using quartz
3 years for the lithium battery
-25 ºC to +70 ºC
IP 51 according to EN 60529
According to EN 62056-21
According to EN 50065-1
OFDM according to PRIME
DLMS
0.5 A / 250 Vac
23 24
50 Hz.
2 W, in normal
Publicidad
