ANTI DRIP FEATURE
This iron is equipped with an anti drip feature that will protects fabrics
from water spotting even at low temperatures.
CARE AND CLEANING
Clean the iron regularly according to the hardness of the water
•
and the frequency of use.
Fill the water tank and put the thermostat in MAX position.
•
Plug in the appliance. The pilot light will come on. Make sure the
•
steam dial is in "0" position. Put the iron in vertical position.
Never use vinegar or other liquids to descale the iron.
•
As soon as the pilot light goes out, hold the iron over a sink and
•
press the cleaning button (6). Steam, water and dust particles will
come out of the soleplate.
When the water tank is empty, release the cleaning button.
•
To clean the plastic parts of the iron when it has cooled down,
•
use a humid cloth.
To clean the soleplate, make sure you use a product made
•
especially for this purpose. Never use abrasive products.
WHEN YOU HAVE FINISHED IRONING
Turn temperature dial to "MIN" and unplug iron from electrical
•
outlet.
With soleplate facing away from you, turn iron upside down to
•
empty water.
Then store the hot iron on its heel rest so that any remaining
•
moisture will evaporate. When the soleplate has cooled down,
you can store the iron.
8
Assembly page 8/20
USK DA 31750 - 091222