Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
They should be placed in sealed refuse receptacles and
disposed of through regular trash pick-up procedures.
During clean up, children and pregnant women should
be kept away from the immediate work area.
3. All toys, washable furniture and utensils used by
children should be washed thoroughly before being
used again.
Fig. D
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Your D
WALT power tool has been designed to operate
e
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the
risk of eye injury, always wear approved eye protection
when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Accessories
WARNING: Since accessories, other than those
offered by D
WALT, have not been tested with this
e
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Accessories for Die Grinders
Mounted stones, point, flap wheels, cutoff wheels and
wire brushes.
Repairs
The charger and battery pack are not serviceable.
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should
be performed by a D
or a D
WALT authorized service center. Always use
e
identical replacement parts.
DWE4997Vs, DWE4997NVs
Voltage
Frequency
Power
Speed
Weight
WALT
e
WALT factory service center
e
spECiFiCaTioNs
aR
B2C
B3
B2
220 V
220 V
120 V
220 V
50 Hz
50 Hz
60 Hz
50–60 Hz
1300 W / 13A
7500–25000
/min (rpm)
4.4 lbs / 2.0 kg (without cord)
5.3 lbs / 2.4 kg (with cord)
ENGlish
BR
127 V
60 Hz
31
Publicidad
Tabla de contenido
