Specification; Pin Allocation Of Balance Output Plug D-Sub25P - KERN PES-A02 Manual De Instrucciones

2 Specification

2.1 Pin allocation of balance output plug D-SUB25P

PIN Signal
1 1. Limit (LOW)
2 1. Limit (LOW)
3 1. Limit (LOW)
4 2. Limit (OK)
5 2. Limit (OK)
6 2. Limit (OK)
7 3. Limit (HIGH)
8 3. Limit (HIGH)
9 3. Limit (HIGH)
10 4. Limit
11 4. Limit
12 4. Limit
13 5. Limit
14 5. Limit
15 5. Limit
16 ERR
17 ERR
18 ERR
19 During
measurement
20 During
measurement
21 During
measurement
22 Audio signal
23 Audio signal
24 External signal (+)
25 External signal (-)
12
All manuals and user guides at all-guides.com
Input/
Output
NO Output ON, when first limit (LOW) is reached
NC Output OFF, when first limit (LOW) is reached
COM - Joint contact first limit (LOW)
NO Output ON, when second limit (OK) is reached
NC Output OFF, when second limit (OK) is reached
COM - Joint contact second limit (OK)
NO Output ON, when third limit (HIGH) is reached
NC Output OFF, when third limit (HIGH) is reached
COM - Joint contact third limit (HIGH)
NO Output ON, when forth limit is reached
NC Output OFF, when forth limit is reached
COM - Joint contact forth limit
NO Output ON, when fifth limit is reached
NC Output OFF, when fifth limit is reached
COM - Joint contact fifth limit
NO Output ON in case of error message
NC Output OFF in case of error message
COM - ERR joint contact
NO Output ON, if measured quantity is 5 times
greater than reading range
NC Output OFF, if measured quantity is 5 times
greater than reading range
COM - Joint contact during measurement
NO Output On for audio signal
COM - Joint contact when audio signal is given
Input Contact for output control (+)
Input Contact for output control (-)
Function
PES-A02-IA-defsi-0610