Motorola NNTN8234 Manual Del Usuario página 9

3. Insert a radio with battery, into the charger's front pocket
by:
a. aligning the groove on each side of the radio with the
corresponding raised rail on each side of the charger
pocket.
b. sliding the radio into the charger pocket, ensuring
complete contact between the charger and radio
contacts.
4. When the radio is properly seated in the pocket, the radio
display will illuminate and display the charge status.
Note: Charge new batteries overnight to ensure full charge.
To minimize charge time, it is recommended to turn the radio
OFF.
5. Insert a battery into the charger's rear pocket by:
a. aligning the slot on each side of the battery with the
corresponding raised rail on each side of the charger
pocket.
b. sliding the battery into the charger pocket, ensuring
complete contact between the charger and battery
contacts.
6. When the battery is properly seated in the pocket, the
charger LED will light in accordance with Table 4 on
page 9.
Note: Charge new batteries overnight to ensure full charge.
7