Initial Settings; Using The App; Home Screen - BeeWi BLCSC Guía De Utilización

5
1.5. Compatibility
The Smart LED Strip can be connected directly via local access mode or remotely using an
optional gateway. Local access mode is supported with SmartPad app by the following
Bluetooth Smart Ready Smartphones and tablets:
- Apple iPhone 4s and next, iPad 3 and next, iPod touch 5 and next models
- Android models with OS 4.3 and more
2. LOCAL ACCESS MODE
2.1. Introduction
Local access mode describes the direct control using a SmartPhone or a Tablet as a remote
controller. This requires the "BeeWi SmartPad" application to be installed in the controller
device.

2.2. Initial Settings

To use Smart LED Strip in local access mode, it is necessary to download the "BeeWi
SmartPad" application on Smartphone or Tablet devices. This app is available on the app
stores for compatible iOS & Android devices.
2.3. Pairing
Before using Smart LED Strip, it is necessary to securely pair the Smartphone and Smart
LED Strip together. This way, only authorized Smartphone or Tablet will be able to access
the LED.
1) Download and install the BeeWi SmartPad app.
2) Turn on the power. The LED will be visible for pairing during one minute after it has
been powered on.
3) Open the app and press "Add Peripheral" to look for your peripheral and initiate
pairing.
4) Once "BeeWi Smart LED Strip" is listed, select it to pair it. After successful pairing, a
new box is showing in the app home screen.

3. USING THE APP

Warning: some operations may differ in function of the OS used.

3.1. Home Screen

The home screen is listing all the peripherals paired and connected to the device.
By selecting the peripheral box, it is possible to:
- Reconnect the peripheral in case the connection has been lost
- Access the control screen when the peripheral is connected
- Drag and move the box when holding the finger on the box
In the box, you will find the following information and function:
- Smart LED Strip picture (user defined)
- Smart LED Strip name (user defined, "BeeWi Smart LED Strip" by default)
- Connection status and signal strength bar
- On/Off status symbol
- Manual On/Off switch button
- Current mode (RGB)
ENGLISH