Garden Wood Furniture 85967KFRS3 Manual De Usuario página 3

ASSEMBLY INSTRUCTIONS
II
x4
FIG. 1
Loosely
1) attach each Left and Right Front Leg (B2 & A2) to the Seat Assembly (H2)
with Hex Bolts (II).
KK
x2
FIG. 2
2) Attach the Right and Left Back Supports (C2 & D2) to the Seat Assembly (H2)
with one Wood Screw (KK) through the upper holes. The longer edge of the back
supports must be towards the front of the chair.
KK
x8
FIG. 3
3) Attach the Back Assembly (G2) to the Seat Assembly. The angled edges of the
back supports must be under the upper brace on the back before screwing in
place. Use Wood Screws (KK) to attach upper back brace into the top edge of
the Back Supports (C2 & D2) and the Lower Back Brace to attach to the Seat
Assembly (H2).
Fan Back Adirondack Chair
H2
II
C2
D2
H2
G2
KK
KK
A2
B2
FRONT
KK
KK
KK
II
II
JJ
85967KFRS3 – Page 3