Flex FX6151 Manual Del Operador página 10

GEAR SELECTOR (FIG. 5)
NOTICE: Change gears only when the motor
is off.
Press the gear-selector release button (1) and
Fig. 5
SETTING THE SPEED (FIG. 7)
To set the speed mode, press on the left or right
edge of the switch.
When the left edge is all the way down, the
–
speed mode "1" is active.
When the right edge is all the way down, the
–
speed mode "3" is active.
When the center part of the switch is all the
–
way down (both edges are up), the speed
mode "2" is active.
Please refer to the table below for the maximum
speed depending on the active speed mode and
gear set.
Gear
Speed mode
1
2
3
ADJUSTMENTS
2
1
LO HI
210 /min 320 /min
325 /min 490 /min
530 /min 780 /min
turn the gear selector counterclockwise to the
desired gear setting – "HI" or "LO" (Fig. 6).
"LO" – Low gear with higher torque
"HI" – High gear with higher speed
Fig. 6
Fig. 7
1/2/ 3
-10-