How To Attach The Stand; How To Remove The Stand - Hitachi M24G1 Guia Del Usuario

How to attach the stand

NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned space to work at to avoid any damage to the
unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1
Carefully place the TV screen face-down on a clean, cushioned surface.
2
Insert and secure the stands (R and L) with 2 screws (supplied) each side as shown in Figure 1.
L
R
Stands
• Be sure to follow the above instructions. Insufficient tightening or incorrect installation of the stand will not support your TV correctly,
and could result in damage or injury from tip-over.

How to remove the stand

When you transport this product, remove the stand and pack it flat against the back of the unit in the carton. To remove the stand,
perform the above steps in reverse order.
When you mount the TV on the wall, remove both stands (R and L).
Figure 1
L
R
Stands
Screws
7 EN