Publicidad
Idiomas disponibles
Idiomas disponibles
3
L'apparecchio non deve essere esposto a stillicidio o a spruzzi d'acqua, quando montato nel contenitore F115/8A (BTicino)
EN
Description
Power supply to be used for the burglar-alarm system power supply together with the
external siren item 4072A (optional), made in modular container for DIN rail (8 modules).
It is designed for installation in surface-mounted switchboards item F115/8A (BTicino).
The power supply is made to be connected to a 12V battery - (6.5 – 24) Ah for the system's
back-up working.
It is recommended that the 7.2 Ah battery is installed on a distribution board flush mounted
to the wall using items F496/FF and F496/PF (BTicino).
Features
- Power supply: 230 Vac ± 10% 50-60Hz
- Output: two wire
- Maximum current for burglar-alarm system: 700 mA
- Maximum current for automation system: 1A
- Battery charging current: 400 mA
- Rated voltage in output 27.5 Vdc
- System lifetime: see table BOX 5
- Degree of IP protection: IP 30
- Operating temperature: 5 – 40 °C
- Protection against tampering by means of item L4630
- F1 Fuse: F5AL
24 h
Lifetime when
there is
15 h
a power cut
8 h
1
Collegare le batterie ai morsetti dell'alimentatore (3) utilizzando
l'apposito cavo completo di protezione con fusibile.
Prestare attenzione alla polarità della batteria durante il
collegamento.
Installare i coperchi di
chiusura dei contenitori.
Type of battery installed
7,2 Ah
12 Ah
24 Ah
110 mA
190 mA
380 mA
180 mA
300 mA
600 mA
340 mA
560 mA
700 mA
3
230 ± 10% V~ 50-60Hz
I MAX= 300 mA
BUS 27V
1A BAT 400 mA
T=5÷40°C F1= F5AL
The following table gives the maximum absorption which the system must have
depending on the battery installed and the life-time level required.
In all cases the maximum absorption must not exceed 700 mA.
2
2
4
Nel caso si intenda proteggere il vano
batteria, collegare il contatto presente sul
contenitore F115/8B (BTicino) (4) ad una
linea tamper.
08W20
12V
Publicidad
