Publicidad
Idiomas disponibles
Idiomas disponibles
12
• Fasten stand to pipe with label facing
desired direction of box opening. Do
not pinch heating cable.
• Loop and tape extra heating cable
to pipe.
13
• Screw box onto stand until it stops. Do not overtighten.
15
• Insert cable tie through slots on stand and box, and tighten firmly to
prevent box rotation.
Raychem-IM-H56046-JBS100A100A6-ML-1805
1 in (25 mm)
Pipe strap
Trim
Note: For 1 in (25 mm)
and smaller pipes use
adapter (purchased
separately) and install
between stand and pipe.
JBS-SPA
adapter for
small pipes
Glass cloth tape
14
(Optional) To change direction of box opening:
• Loosen locknut using adjustable pliers.
• Lift box and rotate. Make sure tab on threaded piece fits into one of
the four notches in box.
• Tighten locknut.
Notch
Position
adapter
this side
up.
nVent.com | 6
Publicidad
