12
Batter y Char ger
Removing the Battery From the
Computer
NOTICE: You cannot undock your computer while your computer is in
standby mode or hibernate mode. If you choose to first undock the computer,
and then put the computer in standby mode and swap batteries, you have up to
1 minute to safely complete the battery replacement before the computer shuts
down and loses any unsaved data.
Ensure that the computer is turned off, in hibernate mode, or
1
connected to an electrical outlet.
Remove the battery:
2
a
If the computer is docked, undock it.
b
Slide the battery lock latch on the bottom of the computer to the
unlock position.
c
Slide and hold the battery latch release on the bottom of the
computer, and then remove the battery from the bay.
1
1 battery lock latch
2 battery latch release
2