Cleaning And Care - OK. OHD 205-S Manual De Instrucciones

COMPONENTS
Fold out front and rear page for product illustrations.
A. Air outlet
B. Concentrator
C. Diffuser
D. Power cord
E. Hanging loop
OPERATION
Connect the power plug to a suitable electrical outlet.
1
Switching appliance on: Set the air flow switch to 1 (low speed) or 2 (high speed).
2
Switching appliance off: Set the air flow switch to 0.
Temperature: Set the tem perature switch to 1 (low), 2 (medium), or 3 (high).
3
Cool air: Press and hold the cool shot button to activate the cool air function.
4
Stop cool air: Release the button.
Switching appliance off: Set the air flow switch to 0.
5
Unplug the appliance.
6
Using the concentrator/diffuser
7a Attach the concentrator to the appliance.
7b Attach the diffuser to the appliance.
Warning: The concentrator and the diffuser become very hot during use! DO NOT TOUCH!

CLEANING AND CARE

Warning!
Before cleaning, make sure to switch off the appliance (level 0). Disconnect it from the electrical outlet
and let it cool completely.
• Never immerse the appliance in water or other liquids.
• Clean the appliance with a soft, slightly damp cloth. Make sure that no moisture is entering the
appliance during cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp implements to clean
your appliance.
• Dry the appliance thoroughly after cleaning.
Cleaning the air inlet grille
• Regularly clean the air inlet grille to remove hair or lint.
Press the release button.
8
The air inlet grille is now opened.
9
10 After cleaning, close the air inlet grille.
IM_OHD205S_150410_V01.indb 13
13
F. Air flow switch (0, 1, 2)
G. Temperature switch (1, 2, 3)
H. Cool shot button
I. Air inlet grille
J. Release button
EN
10/4/15 2:24 pm