Care And Maintenance; Troubleshooting - HAMPTON BAY 72003/HD Guía De Uso Y Cuidado

Care and Maintenance

RE-LAMPING STRING LIGHTS
WARNING: RISK OF ELECTRIC SHOCK!
Disconnect power at the source prior to re-lamping the string lights. For outdoor
string lights, DO NOT re-lamp light strings during rain or when wet.
□ Re-lamp string lights only during dry and calm weather conditions.
□ Unscrew existing lamps by lightly holding the socket in one hand and twisting the lamp counterclockwise. Lamps may be
the sockets. This is normal to prevent moisture from getting into the socket.
□ Replace with medium base lamps. Screw bulbs into the sockets clockwise until the top of sockets form a tight seal around
bulbs and the bulbs make contact with the sockets. Do not exceed 420 watts (LED) or 1200 watts (incandescent) all sets combined.
Suitable for Incandescent, CFL or LED lamps.
MAINTENANCE
Periodically clean the string light, check connections and ensure no additional weight has been added.

TROUBLESHOOTING

Problem
The lights will not turn on.
The fuse blows, or
the circuit breaker
trips, when the light is
turned on.
Possible Causes
The bulb is burned out.
The power is off.
There is a faulty switch.
There is a faulty wire connection.
The bulb is not making contact with
the terminal.
There are crossed wires, or the power
wire is grounding out.
The receptacle circuit is overloaded.
Solution
Replace the light bulb.
Ensure the power supply is turned on.
Test or replace the switch.
Check the wiring.
Check the position of the terminal
inside the socket.
Discontinue use of the light string. Contact
a qualified electrician or call the Customer
Care Services Team.
Connect to a different receptacle circuit.
5
tight in
the