GCI iKEY PLUS Manual Del Usuario página 12

Visual Quickstart Guide
(continued)
STEP 5: CONNECT HEADPHONES
If you wish to monitor the signal that will be recorded using the
iKEYplus, connect headphones with a 1/8 inch (3.5mm) jack to
the headphone monitor output. The signal coming from the
headphone jack may be very loud, so take the necessary precau-
tions when using this output.
STEP 6: TURN POWER SWITCH ON
Once you turn the unit ON, the iKEYplus will take approximate-
ly 15 seconds to boot. During this process, the LEDs will illumi-
nate briefly, indicating the amount of space that has already
been taken up on the storage device. Once the unit has booted,
the LEDs will shut off, and will instead respond as a VU level
meter.
12
320 320
RECORD RECORD
( )
OPTIONAL