Cleaning - Silvercrest SSMS 600 D4 Instrucciones De Uso

Cleaning

WARNING! RISK OF ELECTRIC SHOCK!
► Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
Under no circumstances may the motor unit 4 be cleaned by immersing it in
water or holding it under running water.
WARNING! RISK OF INJURY!
Handle the extremely sharp blade 7 with caution as it can cause injuries.
►
Reassemble the liquidiser after use and/or cleaning so that you do not
injure yourself on the exposed blade 7.
Keep the blade 7 out of the reach of children.
NOTICE
WARNING! PROPERTY DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
1) Disconnect the power cable.
2) Clean the motor block 4 and the whisk holder 9 with a moist cloth.
Ensure that water cannot permeate through the openings on the motor block 4.
For stubborn stains, put some mild detergent on the cloth. Wipe detergent
residues off with a damp cloth.
3) Clean the blender 5, the bowl lid 6, the bowl 8, the whisk 0, the
measuring beaker q and the blade 7 thoroughly in washing-up water and
then remove the detergent residues by rinsing them with clean water.
4) Dry everything well with a dish towel and ensure that the appliance is
completely dry before re-use.
SSMS 600 D4
The measuring beaker with combined lid/base q, whisk 0, bowl
with combined lid/base 8 and blade 7 are dishwasher-safe.
GB │ MT │
65 ■